• Home
  • Blog
  • How Electric Trolling Motors Make Fishing Easier

How Electric Trolling Motors Make Fishing Easier

In the market, there are numerous fishing cool gadgets. One of these gadgets is the trolling motor. Due to technology, it has enabled anglers to invent and do things that don’t seem possible.

Trolling motors are engines powered with the battery and move the boat quietly in the shallows such that they don’t spook the fish. However, due to the innovation of many gadgets, there comes confusion. In case you don’t know the way of operating these advanced technology pieces, how good are they? You should not fear these electric trolling motors because they are used to make fishing easier.

If you have an electric trolling motor, you get numerous benefits of piloting the fishing craft. These electric trolling motors are also susceptible to caster error and sometimes with disastrous results.

In the current electric trolling motor for fishing, they have a directional arrow on their heads. It is an indicator of the direction that the motor will move your boat when turned on. In case you are using it for the first time, you need to have experience with the much pressure you will apply to the steering pedal for your boat to go on the direction you want.

In most cases, when the steering pedal becomes pushed forward, the trolling motors will direct itself to the right. For example, using heel while pushing the pedal, you need to toe upwards and heel down. It is essential to gain more experience through practice – operating electric trolling motor and getting hang on that steering.

Avoid Overworking The Motor

You should avoid overworking the electric trolling motor and its batteries more than needed. For example, while using the bow trolling motor, expect to run into vegetations.

If the vegetation is thick, the motor will have a hard time working. However, the improved propellers operating with electric will easily run on the vegetation without any problem.

Due to vegetation, and especially on thick ones, the motor will not get through, and it turns the speed up. In such a situation, you have to turn back and forth, the motor to shake off the weeds. In a few seconds, you can pull your motor out and clean the weeds manually.

The electric trolling motor is efficient in fishing, but due to the high volume of weeds, it can stop working. However, this motor is built to be tough, but with an unnecessary wrapping of weeds tightly around their shaft or prop causes breakage or fast wear and tear.

Using A Trolling Motor

If you want to go fishing with an electric trolling motor, pull the outboard. It will help in reducing the drag on the board. Besides, it will also ensure that your outboard will not collect any unnecessary weeds and add more strain on the batteries and trolling motor.

In case it will be possible, ensure you don’t adjust its trolling motor constantly. Due to such inconsistency, it will blurb the power and drain your batteries fast that also scares the fish.

Moreover, you also get the onboard charger that has float charging capabilities when you don’t have any. Plug the batteries after every outing until there is full charging after getting into the water.

Powering

To get efficiency, it’s luxurious because even the battery-amperage-devouring trolling means more weight, money, and batteries that complicate fishing. You can easily maneuver with a lightweight fishing boat. However, for better learning and gaining skills, you need versatile training on rivers.

Due to the reliability of this electronic trolling motor, there has been a huge change in the way fishers plan. Walleye and bass anglers rely on electric trolling motors and usually mated to depth finders.

If you need to fish in saltwater, you will apply electronic propulsion for stripers, redfish, sight-fishing tarpon, and cobia in those deep waters that are deep to pole. However, you leap with the 12-volt power to either 24-volts or 36-volts systems will help to boost the electric motor thrust so that large boats can tame currents and substantial winds around open water and bridges.

Whirring To Life

It is an exception that when chasing bass, the electric trolling motor will remain stowed and especially during fly-fishing. It is something done during double-anchoring or drifting bow to retrieve stability, especially in deep water.

If you are fishing and navigating with the help of an electric trolling motor, you stand amidships with the console. From that point, you can manipulate the electric motor’s cable that is connected to the foot control system. It will help you to steer and search for the depth finder. So, you can slide off the anchor and line stern while preserving the location or fight the fish.

The other crucial thing about electric motor trolling is the presence of the watch-battery-powered remote. It helps to make fishing easier. In case you are fishing during winter, you need to lower the i–pilot shaft through punching on the remote. It should go to its down position. The remote you use also indicates the GPS of the location and speed of your boat – and you can’t get lost while fishing.

Fishing becomes perfect with help of these electronic gadgets. Electric motors and outboard will devour fly lines and fishing when they are turned off while operating and encircled.

Tangling Up

If you lift the minn-kota to its mounting cradle, you realize that no boat or even fly fisher can see. The fly line will creep between the electric motor housing and prop. So the prop will wound the shaft. However, because the slender sinking line is wider compared to the fishing line, it becomes logic that an individual needs to undo tangle for easier fishing.

However, you need to have the necessary tools. For example, if you don’t have proper wrench and screwdriver that can help you in removing the prop, you won’t fish smoothly thereafter. When you open the prop, you can then solve the knotted mess that is hard.

Deploying Trolling Motor

When you go fishing, the first step should be deploying the trolling motor into the water. If you have an electric trolling motor, it will have a handle that will help you launch the electric motor into the water.

You will have to pull the code or cable towards or backward for you to release its lock pin. It is the pin that will allow the electric trolling motor to stay put during the time it's in transit.

Ensure you hear pin movement. When pulling backward, lift the cord upward and move the motor to a flat deployed position. Some of the high trolling motors will be having a hydraulic arm that will assist angler to deploy and pull the motor.

In case the trolling motor will not be having, it won't be a big deal. You have to add more power to stow and deploy the trolling motor.

If you have to pull the motor, start by pulling the trolling motor from water to its initial flat position. Ensure you hear its locking pin clicking to be sure of safe fishing.

Final Words

There are many mistakes that an individual makes while fishing with an electric trolling motor. However, even the veteran have a common problem that they keep facing – thinking the batteries or trolling motor has problems. In most cases, they even forget to turn the trolling motor.

It will depend on the motor you are using. Some motors have a master power switch that is located on the foot pedal. You have to ensure the switch is ON before thinking anything else. Moreover, you also have to turn the foot pedal and set to speed away from its OFF position.

Click Here to Leave a Comment Below 0 comments

Leave a Reply:

CommentLuv badge